Selecting Pgm Audio Signal; Adjusting Pgm Audio Signal Mixing Volume; Selecting Intercom Line To Be Connected To The Intercom Connector - Sony HXCU-100 Service Manual

Selecting PGM Audio Signal

Select the PGM audio signal of the headset connected to the front INTERCOM connector to a desired
level with C07: PGM SEL of the CCU menu.
To select PGM1:
To select PGM2:
To select PGM1 and PGM2 mixed: PGM1+PGM2
Headset output selection
ON
MIC/PGM switch OFF
PGM

Adjusting PGM Audio Signal Mixing Volume

Adjust the PGM audio signal mixing volume of the headset connected to the front INTERCOM connector
to a desired level with C07:PGM1 LVL, PGM2 LVL of the CCU menu.

Selecting Intercom Line to Be Connected to the INTERCOM Connector

Select the intercom line to be connected to the front INTERCOM connector as follows with the INTER-
COM switch.
Producer line:
Engineer line:
Communication only between CCU and camera: PRIV
3-4 (E)
PGM1 (factory setting)
PGM 2
C07:PGM MIX (CCU menu)
INCOM + PGM
OFF
Intercom
Intercom + PGM
PGM
PROD
ENG
L-INCOM/R-PGM
Left: Intercom
Right: PGM
HXCU-100