Mb-1124 Board - Sony HXCU-100 Service Manual

5-5-10. MB-1124 Board

1. Remove the front assembly.
(Refer to Section 5-1.)
2. Remove the DPR-300 board.
(Refer to Section 5-5-6.)
3. Remove the SY-364 board.
(Refer to Section 5-5-13.)
4. Remove the top cover.
(Refer to Section 5-2.)
5. Remove the rear panel assembly.
(Refer to Section 5-3.)
6. Remove the SDI-97 board.
(Refer to Section 5-5-12.)
7. Remove the VIF-39 board.
(Refer to Section 5-5-14.)
8. Remove the CN-3081 board.
(Refer to Section 5-5-3.)
9. Remove the four screws to remove the
MB-1124 board.
10. Install a new MB-1124 board by reversing
the steps above.
n
When installing the new MB-1124 board,
set it between the claws on the chassis and
tighten the screws.
5-12 (E)
MB-1124 board
PSW3 x 6
Claws on the chassis
PSW3 x 6
HXCU-100