Removing The Front Wheel; Refitting The Front Wheel; Handlebar Removal - PIAGGIO NRG Power DT Workshop Manual

Suspensions
Sospensioni anteriore
This section is devoted to operations that can be carried out on the suspension.
Front

Removing the front wheel

- Support the vehicle in such a way that the front
wheel is raised.
- Using two 18 mm hexagonal wrenches remove
the front wheel axle.

Refitting the front wheel

- When refitting, pay attention in repositioning the odometer drive correctly.
Locking torques (N*m)
Wheel fixing nut 40 to 50 N.m
Handlebar
Removal
- Remove the front handlebar cover.
- Remove the rear handlebar cover.
- After removing the transmissions and discon-
necting the electrical terminals, remove the bolt
«A» and the handlebar
- Check all components and replace faulty parts.
N.B.
IF THE HANDLEBAR IS BEING REMOVED TO
REMOVE THE STEERING, TILT THE HANDLE-
BAR FORWARD TO AVOIDING DAMAGING
THE TRANSMISSIONS.
SUSP - 2
NRG Power DT