Cooling Fan; Removing The Stator; Refitting The Stator; Flywheel And Starting - PIAGGIO NRG Power DT Workshop Manual

Engine

Cooling fan

- Remove the cooling fan by acting on the three
fixings indicated in the figure.

Removing the stator

- Remove the three stator fixings shown in the
photo
- Remove the two pick-up fixings shown in the
photo
- Remove the stator with the wiring

Refitting the stator

- Refit the stator and flywheel carrying out the removal procedure in reverse, tightening the retainers to
the specified torque.
N.B.
THE PICK-UP CABLE MUST BE POSITIONED ADHERING TO THE FUSION TONGUE ON THE
CRANKSHAFT IN SUCH A WAY AS TO AVOID BEING CRUSHED BY THE FAN COVER ASSEM-
BLY.
Locking torques (N*m)
Pick-up screws 3 ÷ 4 Stator screws 3 ÷ 4

Flywheel and starting

ENG - 18
NRG Power DT