Removing The Front Wheel; Front Wheel Hub Overhaul - PIAGGIO Runner 125 Service Station Manual

Suspensions
This section is devoted to operations that can be carried out on the suspension.
Front

Removing the front wheel

•
Remove the front brake calliper after
undoing the screws fixing it to the leg.
•
Loosen the wheel axle locking nut.
•
Loosen the two wheel axis safety
screws on the leg on the RHS.
•
Remove the wheel axle.

Front wheel hub overhaul

- Remove the front wheel
- Keep the wheel level by means of two wooden
wedges
- With the appropriate pliers and tool remove the
wheel bearing on the side the rpm indicator detects
movement, as shown in the photograph
Specific tooling
001467Y014 Pliers to extract ø 15-mm bearings
001467Y009 Driver for OD 42-mm bearings
SUSP - 220
Runner 125 - 200