Steering Bearing - PIAGGIO NRG Power DT Workshop Manual

Suspensions
- Only remove the seats if it is strictly necessary.
- Using the special tool remove the upper fifth
wheel seat by putting the special tool into the lower
part of the headstock as indicated in the figure.
- By inserting the punch into the top of the tube,
remove the lower fifth wheel seat from the head-
stock.
Specific tooling
020004Y Punch for removing fifth wheels from
headstock
Refitting
Refitting the top and bottom frame housings
- Using the special tool, refit the upper and lower
bearing seats on the headstock.
Specific tooling
001330Y Tool for fitting steering seats

Steering bearing

Removal
Overhauling the bearing housing on the fork
Check the condition of the fifth wheel and the fifth
wheel seat on the fork (steering tube). Replace if
there are faults.
- Support the fork properly.
- Using the special tool, remove the fifth wheel seat
on the steering tube as shown in the photograph
by applying small mallet blows.
Specific tooling
020004Y Punch for removing fifth wheels from
headstock
SUSP - 6
NRG Power DT