Removal Of The Engine From The Vehicle - PIAGGIO NRG Power DT Workshop Manual

Engine from vehicle

Removal of the engine from the vehicle

1. Detach the battery.
2. Remove the exhaust assy.
3. Remove the rear wheel.
4. Remove the rear brake cable.
5. Detach the electrical connection to the fly-
wheel.
6. Detach the throttle and mixer cables.
7. Detach the mixture oil, fuel, and vacuum
pump outlet tubing.
8. Detach the H.T. cable from the spark plug.
9. Remove the rear shock-absorber fixing bolt
from the engine.
10.Remove the nut on the l.h.s., and hence re-
move the engine - swing-arm fixing bolt.
Locking torques (N*m)
Engine-swinging arm bolt 33 ÷ 41 Shock ab-
sorber-engine pin 33 to 41 Nm Rear wheel axle
nut 104 ÷ 126
ENG VE - 2
NRG Power DT