Suspensions
Front suspension
This section is devoted to operations that can be carried out on the suspension.
Front
Removing the front wheel
- Remove the five Allen screws that fix the wheel
to the hub.
N.B.
BEFORE REMOVING THE WHEEL HUB, RE-
MOVE THE BRAKE CALLIPER.
Front wheel hub overhaul
- Remove the ball bearing seeger ring indicated in
the photograph
Extract the ball bearing using the specific tool
Specific tooling
001467Y014 Pliers to extract ø 15-mm bearings
001467Y017 Bell for bearings, outside Ø 39 mm
SUSP - 2
Vespa LX 125 - 150 4T Euro 3