Removing The Steering Ring Nut; Refitting The Steering Ring-Nut - PIAGGIO NRG Power DT Workshop Manual

NRG Power DT
Always use a new fifth wheel seat on refitting.
- Using the special tool, refit the fifth wheel seat
with the aid of a few mallet blows and bring it as
far as the stop shown in the photo.
Specific tooling
006029Y Punch for fitting fifth wheel seat on
steering tube

Removing the steering ring nut

- Remove the handlebar.
- Remove the bearing of steering ring nut using the
specific tool.
Specific tooling
020055Y Wrench for steering tube ring nut
See also
Handlebar
Refitting

Refitting the steering ring-nut

- After locking the first ring nut in place, lock the
second ring nut using a specific tool.
Specific tooling
020055Y Wrench for steering tube ring nut
Locking torques (N*m)
Locking torque: 30 to 40 Nm
Suspensions
SUSP - 7