Density Reduction Due To Idc Sensor Contamination - Konica Minolta bizhub PRO950 Troubleshooting Manual

5/48

Density reduction due to IDC sensor contamination

TNBT0900010EN
Category: Main body(Process) Date of issue: Jan.28.2009
SYMPTOM:
If the IDC sensor is cleaned with dry cloth during machine setup or periodical
maintenance, IDC sensor may become unable to detect the density correctly,
causing image density reduction or toner spill to occur.
REQUEST:
When cleaning the IDC sensor, be sure to clean with a cotton swab or the like
moistened with alcohol.
IMPORTANT:
If the IDC sensor has been cleaned with dry cloth, replace the sensor.
Sensor once cleaned with dry cloth cannot restore the functionality even if it is
cleaned with alcohol.
Be sure to replace it.
Return to home