Konica Minolta bizhub PRO950 Troubleshooting Manual page 47

Category: Option(ZU)
Subject:Problem:Jam 72-45 in ZU-605 and ZU-607
Cause: Burr on the top of Guide Plate 3 in ZU-605 and ZU-607
Solution: After confirming the burr on Guide Plate 3, remove burr in accordance
with attached files.
1. Put the curled A4 Paper into the entrants of guide plate.
Rotate rotary knob and confirm whether burr is on the guide plate or
not.
2. Remove the burr on Guide Plate 3 (Refer to attached file)
3. If you don't feel burr, work is completed.
Return to home
Go to the next page
J7245 (ZU605/607)
TABT0900123EN
Date of issue: June.29.2009
45/48