Konica Minolta bizhub PRO950 Troubleshooting Manual page 46

5. Continue printing until there occurs any problems you want to obtain.
*Print speed gets slower than usual according to the contents of acquisition (or the contents
of the key file).
6. Before removing the USB memory, open the front door/Rt of the main body
the USB memory.
7. Check to see if the access lamp of the USB memory stops flashing, and then remove the
USB memory from the USB port provided on the IC board (ICB).
8. Check to see if there are files obtained on the day in the USB memory, and then copy all of
the files stored to the PC.
<Files to be obtained with switch=ON>
- MIO_yyyymmdd_hhmmss.txt
- NET_yyyymmdd_hhmmss.txt
- RIP_yyyymmdd_hhmmss.txt
- PDL_yyyymmdd_hhmmss.txt
- TIF_yyyymmdd_hhmmss.txt
* A part of log file name "yyyymmdd_hhmmss" describes the following.
yyyy: year mm: month dd: day hh: hour mm: minute ss: second
Ex. 20090204_152230--> This file captured at 15:22:30 on February 2, 2009.
9. Compress the files copied to the PC to be sent to KMBT.
Return to home
Production Support Department 2
4
44/48
2009/08/07
BT-CSO
to start writing to