Removing And Replacing The Display Module Assembly - Motorola MOTOKRZR K1m Service Manual
Cdma 1900 mhz, cdma 800 mhz wireless telephone
Hide thumbs
Also See for MOTOKRZR K1m:
- User manual (227 pages) ,
- Getting started manual (59 pages) ,
- Manual (11 pages)
Table of Contents
Advertisement
Level 1 and 2 Service Manual
Removing and Replacing the Display Module Assembly
G
6809504A60-A
1.
Remove the battery cover, battery, rear housing, antenna, transceiver board
assembly, flip assembly cover, and camera assembly, as described in the
procedures.
The flexible printed cable (FPC) (flex) is easily damaged. Exercise extreme care when
handling.
2.
Use the disassembly tool to unseat the flip assembly flex connector and the
camera connector from their sockets (see Figure 28).
Disassembly tool
Figure 28. Display Module Assembly Flex Connector
3.
Carefully lift the display module assembly out of the flip assembly.
4.
Avoid damage to the electrical components on the flex while carefully removing
the display module assembly from the flip assembly.
March 09, 2007
Flip flex/vibrator connector
Disassembly
061184o
35
Advertisement
Table of Contents
