Mounting The Cutter - CAB Eos Operator's Manual

2 Installation

2.3 Mounting the Cutter

The cutter contained in the contents of delivery must be mounted to the printer
during the initial start-up.
5
4
3
1
Fig. 6 Mount Cutter
1. Put snap arm (5) of the cutter with the groove (4) first into the guide on the
retainer (2).
2. Push cutter (1) down into the holders (3).
3. Fold up cutter (1) so that is snaps it at both sides of the retainer (2).
1
2
11