Korg pa 900 User Manual page 286

Media mode
282
Load
Loading a single bank
You can load a single bank of data (Sounds, Styles, Perfor-
mances) with a single operation. Each bank corresponds to each
of the side tabs in the various Select windows (Style Select, Per-
formance Select...).
1. If loading from an external device, connect the device to
the USB Host port.
Use the Device pop-up menu to select the source device.
2.
When the device is selected, its content will appear in the
display.
3. If the folder you are looking for is inside another folder,
select this latter and touch the Open button to open it.
Touch the Close button to go back to the parent folder.
4. Select the ".SET" folder containing the data you wish to
load, and touch Open to open the ".SET" folder. A list of
User data appears (Global, Performance, SongBook,
Sounds, Style...).
5. Select the folder containing the type of data you are looking
for, and touch Open to open the selected folder. A list of
Favorite/User banks appears.
6. Select the bank file you are looking for, and touch Load to
confirm the selection. A dialog box appears, asking you to
select one of the available User (or Favorite/User Style)
banks in memory.
In the example above, the previously selected Style bank
will be loaded into the bank USER 1 in memory. The Styles
already existing in memory will be deleted and overwritten.
Select the target bank, and touch OK to load the source
7.
bank.
Warning: After confirming, all User data contained in mem-
ory are deleted.
Note: You can save space for loading new data by deleting all
unused PCM Samples from memory. When Sounds or Drum
Kits based on external PCM Samples are deleted, you no lon-
ger need the now unassigned PCM Samples. Use the "Not
assigned to any Multisample/Drumkit" Delete option in the
Sampling mode to delete all the unassigned Samples (see
page 244).
Note: If you are loading a bank of Sounds, and one or more
Sounds or Drum Kits use external PCM Samples, the Sam-
ples are automatically loaded (unless they are already in
memory).
Loading a single item
You can load a single item with a single operation.
If loading from an external device, connect the device to
1.
the USB Host port.
2. Use the Device pop-up menu to select the source device.
When the device is selected, its content will appear in the
display.
3. If the folder you are looking for is inside another folder,
select this latter and touch the Open button to open it.
Touch the Close button to go back to the parent folder.
4. Select the ".SET" folder containing the data you wish to
load, and touch Open to open the ".SET" folder. A list of
User data appears (Global, Performance, SongBook,
Sounds, Style...).
Select the folder containing the type of data you are looking
5.
for, and touch Open to open the selected folder. A list of
banks appears.