Editing the Entries
While in the Book Edit 1 page, you will be able to see the name of the selected Style or Song, and
choose whether to replace them or not.
Name of the Style or Song file linked to the Entry.
If checked, the current Style track settings, or the path of the
Song file (shown on the right), are saved with the Entry. If
unchecked, current settings are left unchanged.
This parameter is automatically checked when touching the
New Song button to create a new Entry.
If checked, you can either save all the current STSs into the
Entry, or choose a single STS where to save the current Key-
If checked, you can save the current Voice Pro-
cessor Preset into the Entry. If left unchecked,
current settings are left unchanged.
When done with this page, touch the Book Edit 2 tab to see the Book Edit 2 page and
edit the SongBook database details.
(Text Edit) button next to the field(s) you want to edit. Set all the other
You can write the Genre and Artist name. Select a Tempo matching the Song's Tempo, and select
the Meter (Time Signature) and Key of the Song. You can also specify a Master Transpose value,
to be automatically selected when selecting the Entry.
When done with this page, touch the Book Edit 3 tab to go to the Book Edit 3 page,
where you can and set the Synchro and Memory parameters, and link a text file to the
Synchro (for Style) and Memory (for Style
and Songs) On/Off status
board track settings.
Name of the Entry
Song Selection num-
ber (ID number for
(This is just an indi-
cator). When it
the VP Preset you
are saving corre-
sponds to the Global
Voice Processor Pre-
Note: The Master Trans-
pose might not change, if a
Lock is preventing it. See
Global > General Controls >
Text file linked to the Entry.
This text will be seen in the
same way of ordinary Lyrics
in the display (or in the