Style Play mode
Touch the Split tab to select this panel. This is where you can set
the split point and activate the Bass Inversion.
Use this parameter to select a different split point. A full-range
piano keyboard is shown in the display, divided at the selected
split point. Upper tracks play on the right of this point, while the
Lower track plays on the left.
Touch anywhere on the keyboard diagram. A message will
appear, asking you to press the new split point on the keyboard
of your Pa900 (or to press the EXIT button to close the message
with no changes).
There is a global split point, and a "local" one, that can be mem-
orized into the Performances and STSs.
You are editing the global split point. The global
split point is considered when selecting a Perfor-
mance or STS that does not contain a "local" split
You are editing the "local" split point memorized
in the current Performance or STS.
Touch the Sub-Scale tab to select this panel. This panel replicates
the "Mixer/Tuning: Sub Scale" edit page (see page 117). .
With the "Quarter Tone" button not pressed
With the "Quarter Tone" button pressed