Service Scans
Calling up the Service Menu
Service menu overview
Service
Exiting the Service Menu
36
Diagnosis
Actuator test
Coding level 1
Coding level 2
Fault history
Service functions
Terminate service?
Vitotronic 300, GW5B Installation and Service
Press OK and
simultaneously for approx. 4 sec.
General
Heating circuit 1 HC1
Heating circuit 2 HC2
Heating circuit 3 HC3
DHW
Solar
Brief scan
Reset data
Participant check
Service PIN
"Coding level 2" is only displayed if this level has
been enabled:
Press OK and
simultaneously for approx. 4 sec.
1. Select "Terminate service?".
2. Select "Yes".
3. Confirm with OK.
Note: The system exits the service menu automatically
after 30 min.