Door Seal Trim - Daewoo Nubira User Manual

9P – 32IDOORS
Installation Procedure
1. Install the door weatherstrip.
Notice : Dissimilar metals in direct contact with each other
may corrode rapidly. Make sure to use the correct fasten-
ers to prevent premature corrosion.
2. Install the door hold open link to the body with the
bolt.
Tighten
Tighten the door hold open link–to–body bolt to 27
NSm (20 lb–ft).

DOOR SEAL TRIM

Removal Procedure
1. Remove the door trim panel. Refer to Section 9G,
Interior Trim.
2. Remove the screws and the door pull bracket.
3. Remove the inside door handle. Refer to"Inside
Door Handle" in this section.
4. Remove the door seal trim.
DAEWOO V–121 BL4