Daewoo Nubira User Manual page 596

DAEWOO V–121 BL4
ENGINE CONTROLS 1F – 393
6. Remove the Manifold Absolute Pressure (MAP)
sensor from the intake manifold.
7. Disconnect the MAP sensor harness from the MAP
sensor.
Installation Procedure
1. Connect theMAP sensor harness to the MAP sen-
sor.
2. Install the MAP sensor into the intake manifold.
3. Connect the throttle cable to the throttle body and
bracket.
4. Install the air intake tube.
5. Connect the breather hose to the valve cover.
6. Connect the IAT sensor connector.
7. Connect the negative battery cable.