9P – 22IDOORS
4.
Remove the nuts and the regulator.
Installation Procedure
Notice : Dissimilar metals in direct contact with each other
may corrode rapidly. Make sure to use the correct fasten-
ers to prevent premature corrosion.
1.
Install the window regulator with the nuts.
Tighten
Tighten the window regulator nuts to 8 NSm (71 lb–in).
2.
Connect the electrical connector.
3.
Install the front door glass. Refer to Section 9L,
Glass and Mirrors.
4.
Connect the negative battery cable.
DAEWOO V–121 BL4