Daewoo Nubira User Manual page 629

1G – 10IENGINE EXHAUST
4. Remove the bolt that secures the trim ring, (if
equipped), to the rear muffler pipe.
5. Remove the trim ring.
6. Detach the rear muffler pipe from the rear rubber
hangers at the top of the rear muffler assembly
near the exhaust tail pipe and near the junction of
the rear muffler pipe with the front muffler pipe.
7. Remove the rear muffler assembly.
8. Check the rear muffler and the pipes for holes,
damage, open seams, and other deterioration
which could permit exhaust fumes to seep into the
passenger compartment or the trunk.
Installation Procedure
1. Place the exhaust tail pipe trim ring, (if equipped),
on the rear muffler pipe.
2. Secure the exhaust pipe trim ring on the rear muf-
fler pipe, and tighten the exhaust trim ring bolt until
it bottoms out on the exhaust pipe. Tighten an addi-
tional quarter turn.
3. Secure the rear muffler assembly to the rear rubber
hangers near the exhaust tail pipe and near the
junction of the rear muffler pipe with the front muf-
fler pipe.
DAEWOO V–121 BL4