Daewoo Nubira User Manual page 201

4D – 6IFRONT DISC BRAKES
4. Align the marks that were made when removing the
front wheel, and install the wheel. Refer toSection
2E, Tires and Wheels.
5. Lower the vehicle.
6. Fill the master cylinder reservoir to the proper level
with clean brake fluid.
7. Bleed the air out of the brake system. Refer toSec-
tion 4A, Hydraulic BrakesorSec–tion 4F, Antilock
Brake System.
8. Recheck the fluid level in the master cylinder.
9. Repeatedly press the brake pedal to bring the pads
into contact with the rotor. Do not move the vehicle
until a firm pedal is obtained.
ROTOR
Removal Procedure
1. Remove the caliper. Refer to "Caliper"in this sec-
tion.
2. Remove the brake pads.
3. Remove the caliper mounting bracket.
4. Remove the rotor detent screw.
5. Remove the rotor.
DAEWOO V–121 BL4