Daewoo Nubira User Manual page 199

4D – 4IFRONT DISC BRAKES
Installation Procedure
1. Install the brake shoes.
2. If new brake shoes are being installed, they will be
thicker than the worn pads that were removed.
Push the caliper piston inward, if necessary.
3. Pull the caliper downward and install the lower
mounting bolt.
Important : Do not damage the piston dust seal when the
caliper is pulled downward to reinstall the lowermounting
bolt.
Tighten
Tighten the caliper mounting bolt to 22–32 NSm
(16–24 lb–ft).
4. Align the marks that were made when removing the
front wheel, and install the wheel. Refer toSection
2E, Tires and Wheels.
5. Lower the vehicle.
CALIPER
Removal Procedure
1. Raise and suitably support the vehicle.
2. To preserve wheel balance, mark the position of the
front wheel relative to the wheel hubs. Remove the
wheel. Refer toSection 2E, Tires and Wheels.
3. Remove the bolt which attaches the brake hose to
the caliper. Remove the washers.
DAEWOO V–121 BL4