Daewoo Nubira User Manual page 115

DAEWOO V–121 BL4
BODY FRONT END 9R – 9
Installation Procedure
Notice : Dissimilar metals in direct contact with each other
may corrode rapidly. Make sure to use the correct fasten-
ers to prevent premature corrosion.
1. Install the radiator grille with the nuts.
Tighten
Tighten the radiator grille nuts to 4 NSm (35 lb–in).
FENDER
Removal Procedure
1. Raise and suitably support the vehicle.
2. Remove the front wheel. Refer toSection 2E, Tires
and Wheels.
3. Remove the screws, the bolts, and the front wheel
well splash shield.
4. Remove the side turn signal lamp. Refer to Section
9B, Lighting Systems.
5. Remove the screw and the bolt that secure the
front bumper fascia to the fender.