Maintenance - Compak E6 OD Instruction Manual

We do not recommend the taking apart of the grind assembly unless changing burrs,
or removing a blockage/obstruction in the grind chamber. Removal of the grind
assembly should be performed by a qualified service technician.
11.5. Cleaning the outside of the grinder
To clean the exterior of the grinder, first wipe with a dry soft cloth, and then gently
wipe with a damp soapy cloth.
11.6. Cleaning the touch screen
Proper cleaning should be done with a soft, damp microfiber towel. Preferably
distilled water or other cleaning product specifically designed for touch screen
cleaning.
Turn off the grinder and gently wipe off the screen using a circular motion.

12. MAINTENANCE

12.1. General warning
Before performing any type of maintenance you should:
• Always turn OFF the main power switch to the off position (
• If the grinder is jammed, unplug it from the power source and contact an
authorized service technician.
Not following these warnings can compromise the safety of the grinder as well as
the user.
12.2. General maintenance of the grind chamber
To guarantee the efficiency and correct operation of the grinder, it is essential to
follow manufacturer instructions and ensure that all maintenance work is carried
out by qualified staff.
Dull burrs will result in; a lower quality grind, greater heat generation in the coffee
and grinder, increased electrical consumption, and finally it puts additional stress on
the grinder motor.
20
ORIGINAL INSTRUCTIONS | Ref. quality process 002/03 | v. 22/09/2014 | K06307
).