Compak E6 OD Instruction Manual page 12

) AUTOMATIC–OFF–MANUAL
Plug in the grinder, and place the main power switch (
/ I-OFF-II to position AUTOMATIC / I and open the bean trap (
) to allow coffee to
pass into the grind chamber.
8.3. Grind adjustment system
8.3.1. Parallel micrometrical system
Rotate the grind regulator ( ) until reaching the grind level desired.
Rotating the grind regulator clockwise will result in a courser grind; turning the
regulator counter clockwise will result in a finer grinder* (Fig. 4).
Once you reach the desired grinding point, you can fix the grinding regulation ( )
) (Fig. 5).
using the regulation break (
*
NOTE: Changing grind settings must be done when the grinder is on and burrs are in motion.
Not doing this suposes that the burrs will gunk up and cleaning will be required.
10
ORIGINAL INSTRUCTIONS | Ref. quality process 002/03 | v. 22/09/2014 | K06307