Regulation - Compak E6 OD Instruction Manual

8.1. Adjusting the lower portafilter support
In order to ensure the proper distribution of ground coffee in the portafilter, while
supporting the portafilter in a hands-free position during dosing, it is possible to
adjust the height of the lower portafilter support (
To do this adjustment operation:
1.
Loosen the screw (
with your grinder.
2. Adjust the support to the desired height using the portafilter as the point of
reference.
3.
Tighten the screw (
NOTE: If the adjustment is extreme (too high or too low), difficulties in operating the
dosis button might occur.
8.2. Grinder up Set
Place the hopper (
is in the closed position. Lock the hopper (
to gently tighten the hopper security screw making it match to the hole at the bean
) (Fig. 2).
hopper collar (
Remove the hopper lid (
) (Fig. 3).
hopper (
K06307 | v. 22/09/2014 | Ref. quality process 002/03 | ORIGINAL INSTRUCTIONS
) on the lower support (
) with the Allen Key provided (Fig. 1).
) on the grind regulator (
), fill the hopper with coffee (

8. REGULATION

).
) by using the Allen Key included
) and make sure the bean trap (
) in place using a flat head screw driver
), and replace the lid on the
)
9