Memory Options; Memory Configurations - HP ProLiant ML370 Generation 5 User Manual

NOTE:
Install the processor air baffle.
16.
Install the access panel (on page 26).
17.
Do one of the following:
18.
Close or install the tower bezel, as needed.
o
Slide the server back into the rack.
o
Power up the server (on page 20).
19.

Memory options

This server supports two memory boards. Each memory board contains 8 DIMM slots for a total of 16
DIMM slots in the server. You can expand server memory by installing supported DDR-2 FBDIMMs.

Memory configurations

The server supports the following Advanced Memory Protection (AMP) options to optimize server
availability.
•
Advanced ECC supporting up to 32 GB of active memory using 2-GB FBDIMMs.
•
Online Spare Memory providing additional protection against degrading FBDIMMs supporting up to
28 GB of active memory and 4 GB of online spare memory utilizing 2-GB FBDIMMs.
•
Mirrored Memory providing protection against failed FBDIMMs supporting up to 16 GB of active
memory and 16 GB of mirrored memory utilizing 2-GB FBDIMMs.
Maximum memory capacities for all AMP modes will increase with the availability of 4-GB and 8-GB
FBDIMMs, including a maximum of 64 GB in Advanced ECC mode. For the latest memory configuration
information, refer to the QuickSpecs on the HP website (http://www.hp.com).
The appearance of compatible PPMs may vary.
Hardware options installation 42