Installing Expansion Boards - HP ProLiant ML370 Generation 5 User Manual

Extend the server from the rack, if applicable
2.
Remove the access panel (on page 25).
3.
Press the slot release lever and swing the slot release lever upward.
4.
Remove the expansion slot cover.
5.
Retain the slot cover for future use.
CAUTION:
all PCI slots have either an expansion slot cover or an expansion board installed.
To replace the component, reverse the removal procedure.

Installing expansion boards

CAUTION:
remove all AC power cords before removing or installing the expansion boards.
Power down the server (on page 20).
1.
Do one of the following:
2.
Open or remove the tower bezel, as needed
o
Extend the server from the rack (on page 22).
o
Remove the access panel (on page 25).
3.
Remove the expansion slot cover.
4.
To prevent improper cooling and thermal damage, do not operate the server unless
To prevent damage to the server or expansion boards, power down the server and
("Extend the server from the
("Open or remove the tower
rack" on page 22).
bezel" on page 21).
Hardware options installation 63