System Maintenance Switch; Internal System Health Led Combinations - HP ProLiant ML370 Generation 5 User Manual

Item
16
17
18
19
20
21
22
23
24
25
26
27

System maintenance switch

Position
S1
S2
S3
S4
S5
S6
S7
S8
When the system maintenance switch position 6 is set to the On position, the system is prepared to erase
all system configuration settings from both CMOS and NVRAM.
CAUTION:
properly configure the server or data loss could occur.

Internal system health LED combinations

When the internal system health LED on the front panel
illuminates either amber or red, the server is experiencing a health event. Combinations of illuminated HP
Systems Insight Display LEDs and the internal health LED indicate system status.
Description
Power connector
Fan control/HP Systems Insight Display connector
USB tape drive connector
IDE connector
Processor 2
PPM 2
Power connector
Front video connector
Internal USB connector
Serial 2 connector
Parallel connector
Diskette drive connector
Default Function
Off Off = iLO 2 security is enabled.
On = iLO 2 security is disabled.
Off Off = System configuration can be modified.
On = System configuration is locked and cannot be modified.
Off Reserved
Off Reserved
Off Off = Power-on password is enabled.
On = Power-on password is disabled.
Off Off = Normal
On = ROM treats system configuration as invalid.
Off Reserved
Off Reserved
Clearing CMOS and/or NVRAM deletes configuration information. Be sure to
("Front panel LEDs and buttons" on page 8)
Component identification 14