Operations; Power Up The Server; Power Down The Server; Access The Hp Systems Insight Display - HP ProLiant ML370 Generation 5 User Manual

Operations

Power up the server

To power up the server, press the Power On/Standby button.

Power down the server

WARNING:
remove the power cord to remove power from the server. The front panel Power On/Standby
button does not completely shut off system power. Portions of the power supply and some
internal circuitry remain active until AC power is removed.
IMPORTANT:
Shut down the OS as directed by the OS documentation.
1.
Press the Power On/Standby button to place the server in standby mode. When the server enters
2.
standby power mode, the system power LED changes to amber.
Disconnect the power cords.
3.
The system is now without power.

Access the HP Systems Insight Display

Press the HP Systems Insight Display ejector button to extend and open the HP Systems Insight Display.
To reduce the risk of personal injury, electric shock, or damage to the equipment,
If installing a hot-plug device, it is not necessary to power down the server.
Operations 20