Maintenance; Scheduled.maintenance.table - Advance acoustic Adfinity 17ST Pressure Washer

Model
Cleaning width
Squeegee width
Machine maximum length
Machine width without squeegee
Cylindrical brush size (diameter x length)
Weight without batteries and with empty tanks
Maximum weight with batteries and full tanks
Brush motor power
Cylindrical brush rotation speed
Cylindrical brush pressure

MAINTENANCE

The lifespan of the machine and its maximum operating safety are ensured by correct and regular maintenance
WARNING!
Read carefully the instructions in the Safety chapter before performing any maintenance procedure.
The following tables provides the scheduled maintenance. The intervals shown may vary according to particular working
conditions, which are to be defined by the person in charge of the maintenance.
For instructions on maintenance procedures, see the following paragraphs.
SCHEDULED MAINTENANCE TABLE
Procedure
Battery charging
Squeegee cleaning
Brush/pad cleaning
Tank and vacuum grid with float cleaning, and cover gasket check
Squeegee blade check and replacement
Solution/clean water filter cleaning
Battery (WET) fluid level check
Vacuum system motor filter cleaning
Screw and nut tightening check
Brush/pad-holder motor carbon brush check or replacement
Vacuum system motor carbon brush check or replacement
Drive system motor carbon brush check or replacement
(For Adfinity .20.D.-.X.20.D.-.X.20.C.-.X.24.D)
TM
(1): And after the first 8 working hours.
Adfinity
Technical data for machines with cylindrical brush deck
17 ST, 20 ST, 20 D, X 20 D, X 20 C, X 24 D
TM
SERVICE MANUAL
GENERAL INFORMATION
Adfinity
TM
X 20 C
(2 cylindrical brushes)
20.0 in (510 mm)
30.0 in (760 mm)
49.3 in (1,253 mm)
22.7 in (575.5 mm)
4.3 x 20.0 in (110 x 485 mm)
247.0 lb (112 kg)
573.2 lb (260 kg)
0.54 hp (400 W)
570 rpm
58.4 lb (26.5 kg)
Daily, after
machine Weekly
use
9096982000(1)2007-02
ENGLISH
Every six
Yearly
months
(1)
9