Tmx 24 D) - Advance acoustic Adfinity 17ST Pressure Washer

ENGLISH SERVICE MANUAL
BRUSHING SYSTEM
BRUSH MOTOR CARBON BRUSH CHECK/REPLACEMENT (For Adfinity
Check
1. Remove the deck (see the procedure in the relevant paragraph).
2. At the workbench, remove dust and debris from the motor, especially in the area of the carbon brushes.
3. Remove four protection covers (A) by disengaging the fasteners.
4. Remove the carbon brush nuts (B) with the lead-in wires.
5. Disengage the tabs (C) and remove the carbon brushes (D).
6. Check if the carbon brushes (D) are worn. Replace the carbon brushes when: the contact with the motor armature is
insufficient, the carbon brushes are worn, the carbon brush contact surface is not integral, the thrust spring is broken, etc.
Replace the carbon brushes as an assembly.
Reset
7. Assemble the components in the reverse order of disassembly.
A
34
9096982000(1)2007-02
D
Adfinity 17 ST, 20 ST, 20 D, X 20 D, X 20 C, X 24 D
TM
X 24 D)
TM
B
C
C
A
S301543A