Vacuum.system.motor.disassembly/Assembly - Advance acoustic Adfinity 17ST Pressure Washer

VACUUM SYSTEM MOTOR DISASSEMBLY/ASSEMBLY
Disassembly
1. If the tank (21) contains recovery water:
• Drive the machine to the appointed recovery water disposal area.
• (For.Adfinity 20 D - X 20 D - X 20 C - X 24 D) Turn the ignition key (80) to "0".
TM
17 ST - 20 ST) Turn off the switches (71) and (73).
• (For.Adfinity
TM
• Empty the recovery water tank (21) with the hose (16).
2. Drive the machine on a level floor.
20 D - X 20 D - X 20 C - X 24 D) Turn the ignition key (80) to "0".
3. •. (For.Adfinity
TM
• (For.Adfinity 17 ST - 20 ST) Turn off the switches (71) and (73).
TM
4. Disconnect the battery connector (12).
5. Grasp the handle (41) and carefully lift the tank (40).
6. Remove the screws (A) and recover the washers.
7. Remove the motor cover (B).
8. Remove the filter (C) and the gasket (D).
9. Remove the motor (E), the sound-deadening pipe (F) and the sound-deadening panel (G).
10. Disconnect the electrical connector (H) of the motor (E).
11. Check the efficiency of the gasket (I) and, if necessary, replace it.
Assembly
12. Assemble the components in the reverse order of disassembly, and note the following:
• If necessary, clean the filter (C) before assembling it (see the procedure in the relevant paragraph).
G
F
A
Adfinity
I
E
H
D
C
B
A
17 ST, 20 ST, 20 D, X 20 D, X 20 C, X 24 D
TM
SERVICE MANUAL
RECOVERY WATER SYSTEM
9096982000(1)2007-02
ENGLISH
S301556A
45