Table of Contents
Advertisement
2.3.8 Glass Care – Replacement
The two glasses used in the ENERZONE SOLUTION 2.5ZC are 5 mm thick and have the
same dimension of 13.188" H x 11.875" W. They are tested to reach temperatures up to
1400º F. If a glass breaks, it must be replaced with one having the same specification.
Contact your ENERZONE dealer to obtain a genuine replacement part (see "replacement
parts", in appendix to get the proper part number).
WARNING: TEMPERED GLASS OR ORDINARY GLASS WILL NOT WITHSTAND
THE HIGH TEMPERATURES OF THE ENERZONE SOLUTION 2.5ZC.
WARNING: DO NOT ABUSE THE GLASS DOOR BY SLAMMING IT AGAINST
THE FIREPLACE.
WARNING: DO NOT OPERATE THE FIREPLACE WITH A CRACKED OR
BROKEN GLASS.
In order to replace the glass, use the following procedure;
1- Remove the six glass retainers (4) held in place by six screws (1).
2- Remove the glass frame (2 and 3)
3- Remove the glass (5)
4- To install the new glass, follow the above steps in reverse order.
Figure 4
12
Advertisement
Table of Contents
