8.6
Importing field
boundary data,
step-by-step
Leica mojo3D, Field Boundary
Importing Field Boundary Data
Refer to "Appendix B Formatting USB Flash Drives" for important informa-
tion about using USB drives with the mojo3D products.
Do not turn off the mojo3D, or remove the USB Flash Drive, while the data
import is under way.
To import field boundary data, carry out the following steps:
1. The USB interface is on the lower left front of the
mojo3D display. Lift the rubber cover and insert a
compatible USB Flash Drive into the USB slot.
2. On the main navigation screen, tap the settings button.
mojo3D_010
129