Table of Contents
Advertisement
Leica mojo3D, Auto-Steer
5.2.4
Setting the over-
shoot
Explanation
Overshoot
The overshoot value will control the rate at which the vehicle will drive at the line and
the rate that the vehicle will round off as it approaches the line. A low value will cause
the vehicle to hold off the line longer while a high value will cause the vehicle to
converge quickly and possibly drive past the line.
1. On the tuning screen, tap the overshoot button.
2. Adjust the slider to vary the overshoot, by using the
•
The overshoot can be set between 50% and 150%. The standard setting is 100%.
•
Different overshoot settings and their
approach to the working line:
and
150%
100%
mojoRTK_013
96
.
50%
Advertisement
Table of Contents
