Leica mojo3D User Manual page 24

Leica mojo3D, System Installation
Master input

The mojo3D is a 12-volt DC (negative-to-earth) system only. Connecting to
a 24-volt DC or a positive-to-earth system will cause damage which is not
covered by warranty.

Do not connect the power cable to only one battery of a 24-volt system as
this may cause damage to the vehicle's batteries and connected equip-
ment.
The optional master input on the mojo3D power cable may be connected to an
external switch for remote operation of the Master Record Status button which
starts and stops coverage recording on screen.
The master input should be 12 V when on and ground or floating when off.
24