Leica mojo3D User Manual page 43

NMEA configura-
tion
Leica mojo3D, Running the mojo3D for the First Time
2. Tap to continue.
• If the mojo3D option was selected the NMEA configuration screen appears.
• If another option was selected, then the configuration setup for the selected
device will be displayed.

Refer to "Appendix A mojo3D Enhancements" for more information on
these setups.

If NMEA output is not required tap

If NMEA output is required from the mojo3D, follow the detailed informa-
tion in "9 NMEA Output".
to complete the initial setup.
43