Leica mojo3D User Manual page 249

Connecting cables
Leica mojo3D, mojo3D Enhancements
be mounted in an out of the way location, so that it will not obstruct the opera-
tion of the vehicle such as pedals.
2. Using the four screws and nuts supplied, bolt the mojoXact to a secure location.

Verify that the mojoXact is firmly mounted and cannot move. If movement
is possible, performance may be degraded.
The mojo3D port expansion cable and mojoXact port expansion cable is used to
connect the mojoXact to the mojo3D display unit.

For further information, refer to www.virtualwrench.com.
249