Leica mojo3D, Setting Guidance Types
4.6.5
General informa-
tion
Exporting guide-
lines, step-by-step
Exporting Guidelines
Guidelines can be exported to a USB Flash Drive. This is useful for copying the guide-
lines to other mojo3D units.
Refer to "Appendix B Formatting USB Flash Drives" for important informa-
tion about using USB drives with the mojo3D products.
Do not turn off the mojo3D, or remove the USB Flash Drive, while the
guideline export is under way.
To export guidelines, carry out the following steps:
1. The USB interface is on the lower left front of the
mojo3D display. Lift the rubber cover and insert a
compatible USB Flash Drive into the USB slot.
mojo3D_010
76