Setting Reception Restriction - Kyocera TASKalfa 266ci Operation Manual

Fax Settings > Transmission Restriction

Setting Reception Restriction

Restrict incoming faxes so that you only receive originals from senders registered in Permit FAX No. and Permit ID No.
and senders registered in your Address Book. This mode also allows you to set a [Reject List] for Reception Restriction
so that reception from senders on the list of Rejected FAX numbers or from senders whose Local FAX Number is not
registered are rejected. (You can select whether reception from a party whose local fax number is not registered is
allowed or rejected in Unknown Number Reception on page 9-21.) To change the reception restriction, follow the steps
below.
1
2
Display the screen.
1
Configure the function.
System Menu/Counter.
FAX - TX/RX Restriction
TX Restriction
RX Restriction
1
Permit No. List
Permit ID List
< Back
To not use the reception restriction, press [Off]. To restrict the other parties from which you
receive originals only to the ones registered in Permit FAX No. and Permit ID No. as well as
the ones registered in the Address Book, press [Permit List + Address Book]. To block
incoming faxes from senders registered in Reject FAX No., press [Reject List].
Use [
System Menu/Counter.
System Menu
Send
Document Box
2
FAX
Favorites/Application
System Menu/Counter.
FAX
TX/RX Common
Transmission
Reception
3
TX/RX Restriction
System Menu/Counter.
10:10
TX/RX Restriction - RX Restriction
Off
Off
2
Permit List + Addr Book
Off
1/2
Reject List
9-20
] or [ ] to scroll up and down.
< Back
Cancel
10:10
3/5
10:10
1/2
10:10
1/1
OK