Installing Usb Drivers - Arris Touchstone TM402 User Manual

Getting
Safety Started
Battery
Installation Installation
USB Ethernet
Drivers Configuration

Installing USB Drivers

Follow these steps to install USB drivers on a supported Windows oper-
ating system.
Note: Depending on your operating system, the dialog boxes shown
on your computer may differ slightly from those shown in this
procedure.
1 Make sure the Telephony Modem is on (the Power light should be
on). If not, connect the power supply as described in "Connecting
the Telephony Modem" on page 22.
2 Insert the Touchstone USB Drivers CD.
3 Plug the appropriate end of the USB cable into the Telephony Mo-
dem and the other end into the computer's USB port.
The PC displays the following window:
Touchstone TM402 Telephony Modem User's Guide
Usage Troubleshooting
—continued—
Glossary
25