Chapter 3: Installing The Cable Modem; Connect The Sb8200 To Your Computer - Arris SURFboard SB8200 DOCSIS User Manual

Installing the cable modem
CAUTION: This product is for indoor use only. Do not route the Ethernet cable(s)
outside of the building. Exposure of the cables to lightning could create a safety
hazard and damage the product.
You can set up your modem in one of the following ways.
■ Using the Surfboard Central app (SBC app): It is recommended that you install and set
up your cable modem using the SBC app. For details on how to set up, refer to the
SURFboard Central User Guide for Cable Modems available on the
www.arris.com/selfhelp.
■ Using client device (laptop/desktop): If you are using your client device (laptop/Desktop)
with a wired Ethernet connection, then see
(page 13).

Connect the SB8200 to your computer

Before installing your SB8200:
■ Check with your service provider to ensure broadband cable service is available in your
area.
■ Choose a location in your home where your computer and cable modem are preferably
near existing cable and electrical wall outlets.
SB8200 connection diagram
1. Check that a coaxial cable is already connected to a cable wall outlet or RF splitter (not
included).
®
SURFboard SB8200 DOCSIS
®
3.1 Cable Modem User Guide DRAFT Revision x.5
Connect the SB8200 to your computer
Chapter 3
http://
13