Connecting The Telephony Modem - Arris Touchstone TM402 User Manual

Getting
Safety Started
Rear Panel
TM402A and TM402B Models
C
D
F
A B
TM402G, TM402H, and TM402P Models
D
C
A
B
F
Battery
Installation Installation
E
G
E
G
USB Ethernet
Drivers Configuration

Connecting the Telephony Modem

WARNING: Connecting the Telephony Modem to the home's existing tele-
phone wiring should only be performed by a professional installer. Physical con-
nections to the previous telephone provider must be removed and the wiring
must be checked; there must not be any voltages. Cancellation of telephone ser-
vice is not adequate. Failure to do so may result in loss of service and/or perma-
nent damage to the EMTA.
1 Connect one end of the coaxial cable to the cable outlet or splitter, and the
other end to the Telephony Modem's Cable connector (G). Tighten the con-
nections by hand.
2 Connect one end of the telephone cable to the telephone port on the back
of the Telephony Modem (A or B). Connect the other end to the telephone.
Note: If you have a TM402G, TM402H, or TM402P Telephony Modem and a
phone with two separate lines on a single RJ-11 cord, it must be plugged
into the port labeled "Tel 1/2".
3 Insert the plug from the AC adapter or the power cord into the Power con-
nector on the Telephony Modem (F).
4 Insert the power cord into a convenient AC outlet.
The Power light on the front of the Telephony Modem should light up, then
start flashing. See Troubleshooting
5 After connecting the coax cable and power, proceed as needed:
• Making Ethernet Connections
• Making USB Connections
Note: Do not connect the same computer to both the Ethernet and USB
ports.
Making Ethernet Connections
6 Connect one end of the Ethernet cable to the port on the back of the Tele-
phony Modem labeled "Ethernet 10/100," (D) and the other end to the
Ethernet port on a computer, hub, or broadband router.
Note: If you are connecting to a computer, use the Ethernet cable included
in the Telephony Modem package.
Touchstone TM402 Telephony Modem User's Guide
Usage Troubleshooting
if the Power light does not turn on.
OR
Glossary
22