Table of Contents
Advertisement
2. Installing the Access Appliance
The chapter provides step-by-step instructions for installing your Access Appliance. The
SD300/301 Access Appliance is easy to install; taking an average of 15 minutes to set up.
However, before getting started, it is important for you to read the following information.
About the Access Appliance
Front Panel
The LED indicators on the front of the Access Appliance indicate the current operational
status.
LED
P
S
Description
Power
On when power is being provided by the
power adapter.
Sync
Off when the Access Appliance is not
receiving a service signal from the central
access equipment.
Blinks when the Access Appliance has
not been activated by the central access
equipment.
On steadily when the Access Appliance
has been recognized by the central
access equipment.
Operation
Table of Contents 9
Advertisement
Table of Contents
