Drawer Unit - Toshiba e-studio287CS User Manual

Installing Additional Paper Feed Units
(5) Put the bottoms of the anti-tip
feet on the floor and tighten
them with three screws.
1
Attach the screw in the middle of the
2
oval cutout and tighten the screw.
4
Attach the additional drawer and
spacer to the caster unit.
(1)
Insert the posts of the cabinet to the
bottom holes of the drawer.
3
4
5
(2)
Fix the drawer with the joint-
option and tighten the screws
with the screw-knob.
6
Screw-Knob
Tighten them on the both sides.
Drawers
Spacer
Post
Joint-
Option
- 34 -
5
Put the machine on the additional

drawer unit.

CAUTION
May cause injury!
•
At least three people are needed to
safely lift the machine due to its 50 kg
weight.
(1) Align the rear sides of the
machine and the additional
drawer unit and place the
machine quietly.
(2)
Fix the additional drawer unit
with the joint-option, and tighten
the screw with the screw-knob.
Joint Option
Screw Knob