Table of Contents
Advertisement
Operating the 4x1 HD Switcher w/ Audio Decoding
If the 4x1 HD Switcher w/ Audio Decoding needs to be reset for any reason or if you need
to set the unit to factory (default) settings, follow the instructions below.
1.
From the home screen, press the Menu button.
2.
Use the Volume ▲ or Volume ▼ buttons to navigate to the Misc Setup menu.
MAIN MENU
MISC SETUP
3.
Press the Mode / OK button.
4.
Use the Volume ▲ or Volume ▼ buttons to select the Factory Defaults
option.
MISC SETUP
FACTORY DEFAULT
5.
Press the Mode / OK button. The unit will prompt you to confirm the selection.
OK TO F.DEFAULT
MENU TO CANCEL
•
To Reset: Press the Mode / OK button to reset the unit to factory (default)
settings. If the unit is reset, the 4x1 HD Switcher w/ Audio Decoding will power
OFF
and then automatically power ON after a few moments.
•
To Cancel: Press the Menu button to cancel the reset process and return to the
home screen.
Resetting to Factory-Default Settings
Using the front-panel buttons
page | 39
Using the Menu System
Advertisement
Table of Contents
