Cleaning The Hole Punch Dust Bin; Finisher / Saddle Stitch Finisher Hole Punch Unit; Inner Finisher Hole Punch Unit - Toshiba e-studio 2555c Troubleshooting Manual

1 TROUBLESHOOTING FOR THE HARDWARE

Cleaning the Hole Punch Dust Bin

When the hole punch dust bin becomes full, dispose of the paper punchings following the procedure below.

Finisher / Saddle Stitch Finisher Hole Punch Unit

1
Open the Hole Punch Unit cover.
2
Pull out the hole punch dust bin.
3
Dispose of the paper punchings.
4
Push back in the hole punch dust bin.
5
Close the Hole Punch Unit cover.

Inner Finisher Hole Punch Unit

1
Lift up the control panel and then open the front cover
of the finisher.
2
While holding the green lever, move the finisher to the
left until it stops.
70

Cleaning the Hole Punch Dust Bin

1
2
2
1